| The Workshop |
The timesevices workshop is situated at the top of the Browns building.
It is divided into two rooms. The polishing shop and the workshop.
The workshop has a wooden floor, as carpet would attract too much dust, and if God forbid we drop anything it is easily found.
The main reason that we took this floor is because of the natural light. A skylight runs the entire length of the roof, flooding the room with light.
Our benches were tailor made with built in arm rest to minimise the strain on the arms and back.
We have spent approximately £5000.00 on developing the space for watchmaking. A suspended ceiling was fitted to allow us to use mini spotlights to illuminate the sides of the room without generating too much heat. Our bench lamps use fluorescent daylight tubes to produce a clean white light without excessive heat.
Our tool and equipment stock is second to none. As an example we purchased a tool manufactured by Rolex for removing bezels from their Oyster range. This alone cost over £620.00.
You can see from the pictures that your watch will receive the best care and attention, and be worked on with the correct equipment, by watchmakers competent in their use.
|
Please click on the pictures for a larger image:
|
|
|
| The Tools |
The Bench |
|
The Polishing Room
|
|
 |
|
|
If you have any other horological questions or comments regarding the sections displayed here please contact us
and let us know.
|
The Workshop
|
|
